TT3G50F Surge Protectors là thiết bị chống sét lan truyền cho dữ liệu trên cáp đồng trục, bảo vệ thiết bị khỏi bị hư hại do sét, tĩnh điện, điện áp quá mức đến 5000A
TT3G50F Surge Protectors là thiết bị chống sét lan truyền của Alpha Delta 100% Made in U.S.A. TT3G50F là thiết bị chống sét lan truyền được thiết kế để bảo vệ thiết bị điện tử nhạy cảm khỏi bị hư hại do điện áp hoặc dòng điện quá mức tạo ra bởi sét hoặc tĩnh điện trong khí quyển.

Các phần tử trong Arc- Plug ™ (đây là phần chính trong thiết bị chống sét) bao gồm hai điện cực kim loại được hàn kín trong một hình trụ bằng sứ chắc chắn chứa đầy khí. Chúng hoạt động như các công tắc / cầu chì phụ thuộc vào điện áp, có thể mang cường độ dòng điện lớn ổn định và lặp đi lặp lại trong một khoảng thời gian. Khi hoạt động, điện áp đủ lớn đi qua sẽ tạo ra hồ quang giữa các điện cực, làm thay đổi trở kháng của nó từ > 10.000 mega-Ohms thành vài mili-Ohms trong thời gian dưới 100 nano giây. Trong điều kiện bình thường, điện áp trên bộ chống sét lan truyền nhỏ hơn 30 vôn.

Transi-Trap Surge Protectors are gas surge arresters designed to protect sensitive electronic equipment from damage due to excess voltage or currents generated by transient phenomena (lightning or static buildup).
The elements in the Arc- Plug™Cartridge consist of two metal electrodes hermetically sealed in a rugged gas filled, ceramic cylinder. They perform as voltage-dependent switches which can reliably and repeatedly carry large currents for brief periods of time. In operation, a sufficient voltage across the element cause an arc to form between the electrodes, changing its impedance from greater than 10,000 meg-ohms to a few milli-ohms in less than 100 nanoseconds time. While conducting in the arc mode, the voltage across the surge arrester is less than 30 volts.
The life of the Arc- Plug™Cartridge is a function of the surge current amplitude and duration to which the the device is subjected. Transients are by their very nature unpredictable in magnitude and energy level. Life may be hundreds of operations, depending on surge current wave shape.
After a sufficient number of lightning pulses have been discharged through the Arc-Plug™Cartridge, there is a gradual lowering of breakdown voltage and insulation resistance. Therefore, the Arc- Plug™ Cartridge replacement is indicated by an increase in VSWR during transmitter tune-up, or by a "dead" receiver caused by an extremely strong near-miss lightning discharge shorting the Arc- Plug™Cartridge. In this case, the short continues to protect the equipment until cleared.
Arc- Plug™Cartridge
